ELECTRIC HOBS USER AND INSTALLATION INSTRUCTIONS B11SS...
Page 2
For future reference please record the following information which can be found on the Rating Plate and the date of purchase which can be found in the invoice: Model Number ……………………. Serial Number ……………………. Date of Purchase ……………………. CONTENTS Warning and Safety Instructions page 3 Instructions for Use pages 3-4...
(all Baumatic Engineers are Corgi registered) and for electrical installations, NICEIC registration is recommended. Baumatic Ltd declines any responsibility for injury or damage to persons or property as a result of improper use or installation of this appliance. Heat, steam and moisture will be created during use, take care to avoid injury and ensure that the room is adequately ventilated.
WARNING • Do not use commercial simmering aids as these can create excessive heat that can damage the appliance. • Do not use the glass ceramic surface of the hob as a griddle. • Do not leave hotplates on without a pan or an empty pan. •...
PRE-COMMISSIONING THE APPLIANCE When unpacked, check that the following parts are included with the appliance: • Instruction and Installation Book • Adhesive sealing agent and fixing clamps & screws • Ceramic hob scraper INSTALLATION NOTES Cut the aperture to the dimensions shown in the table below or use the template provided on the packaging.
MAINTENANCE During the guarantee period, in case of need all service intervention should be referred back to the Baumatic Ltd Service department. Please note that intervention or repair by any unauthorised personnel will invalidate such guarantee. TECHNICAL DATA ELECTRICAL DETAILS...
The conditions of the guarantee, which applies, to your Baumatic appliance are as follows: All ‘Work’ in relation to the Guarantee must be carried out by Baumatic Ltd or an approved service agent of Baumatic Ltd. Any claims made under the terms of the guarantee must be supported by the original invoice / bill of sale issued at the time of purchase.
Need help?
Do you have a question about the B11SS and is the answer not in the manual?
Questions and answers