Advertisement
USER INSTRUCTIONS
These User Instructions should be retained for future reference and for use by a person who is
perhaps unfamiliar with the appliance.
The following models are covered by these instructions:
B60
B61
B62
BT62
B64
B67
USING THE HOB
The symbols on the Control Panel fascias show which burner the Control Knob operates.
Dependent on the model there are two methods for igniting the burners.
1.
Auto Ignition
After pressing in and turning the appropriate knob anti-clockwise to the large flame
symbol, the ignition spark will operate as long as the knob is pressed down.
When a flame has been established the knob can be released.
2.
Manual Ignition
After pressing in and turning the appropriate knob anti-clockwise to the large flame
symbol, press the ignition button located on the control panel.
The ignition spark will operate as long as the button is held down. When a flame has
been established, release the button.
To regulate the flame, continue turning anti-clockwise to the required setting between the large
and small flame symbols.
To turn the burner off, turn fully clockwise.
NOTE:
When a Thermocouple Safety Device is incorporated in the appliance, it is necessary for the
knob to be continuously held down for a further period of approximately 10 seconds after the
flame has been established to enable the thermocouple to function.
The Safety Device is designed to stop the flow of gas to the burner head in the event of a flame
out situation.
Please note that this appliance carries the CE mark for normal domestic use and is not suitable
for the marine environment.
6
INSTRUCTIONS FOR USE
B68
B69
B16.5
B16.6
BG2
BWK1
B17.5
B17.6
B17.7
PG2
PWK1
P62
P68
P75
P90
PF75
B44
B46
BC45
BF45
AS24
AS25
Hide quick links:
Advertisement
