Water supply
Connect and fully tighten the inlet hose to the top right hand corner
of the washing machine.
Connect the other end of the inlet hose to your mains water supply
IMPORTANT: There should be a filter sitting inside the end of the
inlet hose that connects to
may leak if this filter is missing. This filter is supplied with the
appliance, you should contact Baumatic to obtain one, if it is
missing.
Tighten the inlet hose to your mains supply fully, but do not ov
tighten as this may distort the filter that sits in the end of the
hose.
Test for any leaks.
Water outlet
Secure the drain hose, so that it cannot move whilst the washing
machine is in use.
Place the end of the drain hose on your drain pipe. Push it a
short way down into your drain pipe.
IMPORTANT: Do n
water pipe, as this may cause siphoning.
NEVER EXTEND THE DRAINAGE HO
LENGTH.
your mains water supply. The inlet hose
ot insert the drain hose too deeply into the
SE FROM ITS ORIGINAL
er
inlet
30