Error Code Failure System - Baumatic BFW1001W User Manual

Error code failure system

If your appliance senses that it is not operating correctly, then the
machine may indicate an error code. If the READY/END neon flashes
and the LOCK DOOR neon lights up, then please refer to the
information given below.
The following error codes can possibly be remedied by the customer
and the steps outlined below should be followed.
BEFORE COMPLETING ANY MAINTAINEANCE ON THE
APPLIANCE, IT SHOULD BE DISCONNECTED FROM YOUR MAINS
POWER SUPPLY.
THE APPLIANCE WILL NOT OPERATE AT ALL
o Power failure.
Check that the power plug is in the mains socket correctly.
Check the mains fuse.
o The door is not closed.
Close the door firmly.
o Low water pressure.
Check the water pressure of your
mains water supply.
Clean the mesh filter that sits in the
inlet hose.
Make sure the water tap that the
machine is connected to is turned on
fully.
o Pump filter clogged.
Clean the filter.
22