Latch Connector; Recline Adjustment; Infant Body Pillow - Britax Boulevard User Manual

Restraint Functions
Storing the LATCH Connector
When LATCH connector is not in use,
lift cover to access LATCH storage
slots (fig. E). Fold LATCH adjuster and
connector, then slide each set into the
adjacent slot.
NOTE: Restraints are shipped from Britax with
LATCH connectors in the storage slots.

Recline Adjustment

Pull recline handle
restraint shell into desired position.
Release recline handle, then verify the
child restraint has locked into position.
IMPORTANT:
full upright position when installed in
forward-facing mode with children
over 33 pounds (15 kg.).

Infant Body Pillow

The Infant Body Pillow is designed to
provide better fit and comfort for infants
using this restraint. For additional side
support, fold side flaps, as shown
below.
NOTE: Remove Infant Body Pillow after child can sit
comfortably in restraint without additional support.
28
(fig. F)
Restraint must be in the
E
then slide
F