Securing Your Child - Britax Boulevard User Manual

Securing Your Child

Once child restraint has been installed in the
vehicle and adjustments have been made,
follow these instructions to secure child.
1 Loosen harness by lifting harness adjuster
lever located on front of restraint while
pulling shoulder straps forward
2 Release chest clip by squeezing tabs and
sliding pieces apart
3 Unfasten harness buckle by pressing
release button and sliding tongues out.
4 Move harness straps to the side of
restraint.
• Use harness holder located on straps and side of
cover to aid in holding straps.
5 Place child in restraint.
6 Position harness straps around child and
fasten harness buckle
clip.
• Proper connection of harness buckle is confirmed
with a positive click after inserting second buckle
tongue.
7 Gently pull up on harness straps to tighten
lap section of harness which should fit
across child's upper thighs.
8 Slowly pull adjuster strap to tighten
harness around the child
9 Position chest clip at middle of child's
chest, level with child's armpits
10 Verify that harness is not twisted and child
is properly secured.
(fig. A)
.
(fig. B)
and chest
(fig. C)
.
(fig. D)
(fig. E)
Securing Your Child
.
A
B
.
C
31