Power button actuator
Table 5-12
Power button actuator description and spare part number information
Description
Power button actuator
Before removing the power button actuator, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4.
Remove the bottom cover (see
a.
Battery (see
b.
Solid-state drive (see
c.
System board (see
Remove the power button actuator:
1.
Release the power button actuator spring arms (1) from the retention tabs (2) built into the keyboard/
top cover.
2.
Press in on the power button actuator (3) to release it from the keyboard/top cover.
3.
Remove the power button actuator.
Reverse this procedure to install the power button actuator.
Bottom cover on page
Battery on page
25)
Battery on page
System board on page
23), and then remove the following components:
25)
35)
Component replacement procedures
Spare part number
L52443-001
41