Part 6 Troubleshooting; Problem - The Receiver Is Connected But Nothing Shows In Usb Wireless; Problem - The Battery Is Draining Too Quickly In The Camera; Problem - The Video And Audio From The Camera Is Slow And The Images Are Stuttery - Zip Rapid Deploy SEE010 Instruction Manual

Rapid Deploy Manual
3. Finally secure the camera with the small locking screw.
6 Troubleshooting
6.1 Problem - The receiver is connected but nothing shows
in USB Wireless
Solution(s):
1. The camera channels need to be altered to USB Wireless before attempting to pair,
please go to
6.2 Problem - The battery is draining too quickly in the
camera
Solution(s):
1. Ensure the battery is fully
2. The camera is activated by the PIR built into the front of the camera, if this is constantly
activated then this will drain the battery.
6.3 Problem - The video and audio from the camera is slow
and the images are stuttery
Solution(s):
1. The cameras and receiver work on a similar wireless range to standard Wi-Fi router
and access points. If the receiver or the cameras are near to one of these devices then
this could interfere with the signal and reduce the working transmission range.
2. Wi-Fi is also affected by solid objects like internal walls, insulation and bricks, avoid
transmission through solid objects as this will also affect the distance and signal
strength.
14
8
channel setup .
6
charged
ZipNVR.com
before setting up with the camera.
© 2021 System Q Ltd