Preliminary Remarks; Safety Instructions And Hints; Intended Use - Aliaxis FRIATEC FRIAMAT basic 7th generation Operating Instruction

1.

Preliminary remarks

1.1

Safety instructions and hints

In these operating instructions, the following symbols with warnings are used:
Symbol
WARNING!
CAUTION
NOTICE
INFORMATION
1.2

Intended use

FRIAMAT fusion units are designed to apply a maximum fusion voltage of 48 V
on the following:
• FRIALEN® safety fittings with HDPE pressure pipes (SDR 17-7),
• FRIALEN® XL large pipe installations with HDPE pressure pipes (SDR 17-7),
and
• FRIAFIT® sewage fittings with HDPE sewage pipes (SDR 17-33).
FRIAMAT fusion units can also be used on fittings from other manufacturers
when these components bear a 24 digit barcode complying with ISO
13950:2007-03. With the optional 1D/2D scanner, the new FRIAMAT is also
ready to read and process 2D barcodes according to ISO 12176-5 (Draft). The
power ratings and technical data of both the fittings and the FRIAMAT fusion
unit must be observed (see also Section 3.14 "Technical data").
Intended use also includes adherence to:
• all of the instructions in these operating instructions,
• the general and specific processing specifications for electrofusion fittings,
and
• the applicable accident prevention regulations, the environmental regula-
tions, the statutory rules, the pertinent safety provisions, and all standards,
laws, and directives applying in the country of use.
4
Danger to persons.
Failing to observe this can cause death or serious injury.
Danger to persons.
Failing to observe this can cause low to medium severity
injuries.
Danger to objects.
Failure to comply can result in objects damage.
Application tips and other useful information.
Failing to observe this cannot cause injury.
Meaning