Table of Contents
Advertisement
5
5.7.2. Rebound damping hydraulic device
(front)
The adjustment is obtained from the standard
position, which is found by fully turning the screw
clockwise and then anticlockwise (see table).
Rotate clockwise to increase the damping action
and anticlockwise to decrease it.
ADJUSTMENTS
5.7.1. Spring preload
The adjustment is performed by referring to the
notches. The minimum preload corresponds to
the position where seven notches are visible. The
maximum preload is obtained when one notch is
visible.
Notches
- 48 -
5
Advertisement
Table of Contents
