Table of Contents
Advertisement
Responding to Error Messages
If transmitter errors are displayed on the camera's monitor, refer to the
examples of corrective actions in this section to eliminate the cause of
the error. When an error has occurred, the <LAN> lamp on the
transmitter blinks and the error code number is shown on the LCD
panel. The error details can also be checked in the menu, [WFT
settings] 9 [Error description].
Click the error code number in the following table to jump to the
corresponding page.
11 (p.71)
12 (p.71)
21 (p.72)
22 (p.73)
41 (p.76)
42 (p.78)
46 (p.80)
47 (p.80)
61 (p.81)
62 (p.81)
66 (p.83)
67 (p.84)
81 (p.85)
82 (p.85)
91 (p.85)
When the error below is displayed
* This error is not displayed on the camera's monitor.
* This error is also displayed when the transmitter is connected to a camera not
compatible with the transmitter.
70
23 (p.74)
24 (p.74)
43 (p.78)
44 (p.78)
63 (p.82)
64 (p.82)
68 (p.84)
69 (p.84)
When "ERROR 01" is displayed on the
transmitter LCD panel, firmly reconnect
the transmitter and the camera with the
interface cable.
45 (p.79)
65 (p.83)
Advertisement
Table of Contents
