Connecting Via Wps (Pin Mode) - Canon WFT-E7 Instruction Manual

Connecting via WPS (PIN Mode)

The instructions in this chapter are continued from page 22.
This is a connection mode available when using an access point
compatible with WPS. In PIN code connection mode (PIN mode), an 8-
digit identification number specified on the camera is set at the access
point to establish a connection.
Even if there are multiple access points active in the surrounding

area, a relatively reliable connection can be established using this
shared identification number.
It may take approx. one minute to establish a connection.

24
Select [Connect with WPS].
1
Select [WPS (PIN mode)].
2
Select [OK] and press <0> to go

to the next screen.
Specify the PIN code.
3
At the access point, specify the 8-digit

PIN code displayed on the camera's
monitor.
For instructions on setting PIN codes

at the access point, refer to the
access point's instruction manual.
After the PIN code is specified, select

[OK] and press <0>.