Setting the IP Address
Completing Settings for the Communication Method
The following instructions are for settings screens that vary depending
on the communication method. Read the page that introduces the
selected communication method.
FTP Transfer
EOS Utility
The IP address can only be set automatically in environments using DHCP
servers, or access points or routers with DHCP server functionality, such
that IP addresses and related settings are assigned and configured
automatically.
Select [Auto setting].
Select [OK] and press <0> to
display the setting screen for the
communication method.
If [Auto setting] results in an error or
if you want to specify the settings
manually, see page 94.
Chapter 2 (p.31)
Chapter 3 (p.49)
29