Table of Contents
Advertisement
Responding to Error Messages
67: Incorrect wireless LAN encryption method
Are the transmitter and the access point set to use the same
encryption method?
The transmitter supports the following encryption methods: WEP,
TKIP, and AES (p.22).
If filtering by MAC address is active, is the MAC address of the
transmitter used registered at the access point?
Register the MAC address (p.67) of the transmitter used at the
access point. The MAC address can be checked on the [Function
settings] screen (p.66).
68: Cannot connect to wireless LAN terminal. Retry
from the beginning.
Did you hold down the access point's WPS (Wi-Fi Protected
Setup) button for the specified period of time?
Hold down the WPS button for the period of time instructed by the
access point's instruction manual.
Are you trying to establish a connection near the access
point?
Try establishing the connection when both devices are within reach
of each other.
69: Multiple wireless LAN terminals have been found.
Cannot connect. Retry from the beginning.
Connection is in progress by other access points in
Pushbutton Connection mode (PBC mode) of Wi-Fi Protected
Setup (WPS).
Wait a while before trying to establish the connection, or try to
establish a connection in PIN code connection mode (PIN mode)
(p.24).
84
Advertisement
Table of Contents
