Table of Contents
Advertisement
Responding to Error Messages
63: Wireless LAN authentication failed
Are the transmitter and the access point set to use the same
authentication method?
The transmitter supports the following authentication methods:
[Open system], [Shared key], and [WPA/WPA2-PSK] (p.22).
Are the transmitter and the access point set to use the same
encryption key for authentication?
The setting is case-sensitive, so check upper- and lower-case
characters. Make sure that the correct encryption key for
authentication is entered on the transmitter (p.27).
If filtering by MAC address is active, is the MAC address of the
transmitter used registered at the access point?
Register the MAC address (p.67) of the transmitter at the access
point. The MAC address can be checked on the [Function
settings] screen (p.66).
64: Cannot connect to wireless LAN terminal
Are the transmitter and the access point set to use the same
encryption method?
The transmitter supports the following encryption methods: WEP,
TKIP, and AES (p.22).
If filtering by MAC address is active, is the MAC address of the
transmitter used registered at the access point?
Register the MAC address (p.67) of the transmitter used at the
access point. The MAC address can be checked on the [Function
settings] screen (p.66).
82
Advertisement
Table of Contents
