Connecting To A Detected Network Manually - Canon WFT-E7 Instruction Manual

Connecting to a Detected Network Manually

The instructions in this chapter are continued from page 22.
Establish a connection by selecting the SSID (or ESS-ID) of the access
point to connect to from a list of active access points nearby.
Selecting the Access Point
(1)
(1) SSID
(2) An icon is displayed if the access point is encrypted
(3) Channel used
[Refresh] and [Manual settings]
Scroll down the screen in step 1 to display [Refresh] and [Manual

settings].
To search for access points again, select [Refresh].

To configure settings for the access point manually, select [Manual

settings]. Enter the SSID using the virtual keyboard and then
configure settings following the instructions displayed.
26
Select an access point.
(2) (3) 1

With the <W> <X> keys, select the
access point to connect to from the
list of access points.