Table of Contents
Advertisement
22: No response from DNS server
What to check on the transmitter
On the transmitter, DNS address is set to [Manual setting]. Is
this the correct setting?
If no DNS server is used, set the transmitter's DNS address setting
to [Disable] (p.94).
On the transmitter, does the DNS server's IP address setting
match the server's actual address?
On the transmitter, set the IP address that matches the address of
the DNS server used (p.89, 94).
What to check on the DNS server
Is the power of the DNS server on?
Turn on the DNS server.
Are the DNS server settings for IP addresses and the
corresponding names correct?
On the DNS server, make sure IP addresses and the
corresponding names are entered correctly.
Is the DNS server working correctly?
Check the DNS server settings to make sure the server is working
correctly as a DNS server.
If applicable, ask your network administrator to ensure that the
DNS server is available.
What to check on the network as a whole
Does your network include a router or similar device that
serves as a gateway?
If applicable, ask your network administrator for the network
gateway address and enter it on the transmitter (p.89, 94).
Make sure that the gateway address setting is correctly entered on
all network devices, including the transmitter.
Responding to Error Messages
73
Advertisement
Table of Contents
