5.Troubleshooting of Communication and Operation Error
Symptom
Camera control does not
work.
Communication is not
possible with the operation
unit.
No video is displayed
although the pan-tilt head
can be operated.
The pan-tilt head does not
move.
6.Index
Control connectors .............................................................................. E13
Panning ............................................................................................... E12
SDI ...................................................................................................... E13
Tilting ................................................................................................... E12
Site where
check is
required
Installation site
(1) Check the power to the pan-tilt head.
(2) Check that the control cable for pan-tilt head and the
cable for camera are connected correctly.
(3) Conduct a continuity check for broken cable wires, etc.
Installation site
(1) Check that each cable is connected correctly.
Installation site
(1) Conduct a continuity check for broken cable wires, etc.
(Disconnect the BNC and check the video from the pan-
tilt head.)
Installation site
(1) This may be due to an outside factor such as strong
wind or some obstacle.
Check and remove any obstructing factors, and perform
the operation again.
Check and confirm
E14