Advanced Bionics CI-5068 Instructions For Use Manual page 13

Inserting the Sound Processor in the M Waterproof
Battery
The M Waterproof Battery has a lock to make sure the
case is not accidently opened, preventing moisture from
entering the case and damaging the sound processor. The
lock is located on the front of the M Waterproof Battery.
While holding the M Waterproof Battery in one hand, use
your forefinger on the opposite hand to push the lock button
while using your thumb to pull the lock away from the case.
The M Earhook, M T-Mic™ microphone, or M Acoustic
Earhook, battery, cable, and headpiece must be removed
from the sound processor before inserting into the case,
however the earhook pin can remain in the processor.
Carefully align the battery connector on the sound
processor with the battery connector in the M Waterproof
Battery and slide the sound processor onto the battery
connector within the M Waterproof Battery, connecting
the cable connector with the M Waterproof battery to the
sound processor.
11