Panasonic PAW-FC Installation And Maintenance Manual page 4

IMPORTANT!
Please Read Before Starting
This equipment must be installed by the sales dealer or
installer. This information is provided for use only by
authorized persons.
For safe installation and trouble-free
operation, you must:
Carefully read this instruction booklet before
•
beginning.
• Follow each installation or repair step exactly as
shown.
• This unit shall be installed in accordance with National
Wiring Regulations.
• This unit complies with the requirements of the
following EU legislation: 2014/30/EU (EMC),
2006/42/EC (Machinery), 2011/65/EU (RoHS),
2014/35/UE (Low Voltage Directive) and all applicable
Standards (see EC Declaration for details).
• Pay close attention to all warning and caution notices
given in this manual.
WARNING
CAUTION
If Necessary, Get Help
These instructions are all you need for most installation sites
and maintenance conditions. If you require help for a special
problem, contact our sales/service outlet or your certified
dealer for additional instructions.
In Case of Improper Installation
The manufacturer shall in no way be responsible for
improper installation or maintenance service, including
failure to follow the instructions in this document.
Notice
The English text is the 'Original language'.
The content of this document is intended for use by the
manufacturer professional personnel only.
SPECIAL PRECAUTIONS
WARNING
ELECTRICAL SHOCK CAN
CAUSE SEVERE
PERSONAL INJURY OR
DEATH. ONLY A
QUALIFIED, EXPERIENCED
ELECTRICIAN SHOULD
ATTEMPT TO WIRE THIS
SYSTEM.
• Do not supply power to the unit until all wiring and
This symbol refers to a
hazard or unsafe practice
which can result in severe
personal injury or death.
This symbol refers to a
hazard or unsafe practice
which can result in
personal injury or product
or property damage.
When Wiring
tubing are completed or reconnected and checked.
Highly dangerous electrical voltages are used in this
•
system. Carefully see the wiring diagram provided with
the IMM Manual when wiring. Improper connections
and inadequate grounding can cause accidental injury
or death.
• Connect all wiring tightly. Loose wiring may cause
overheating at connection points and a possible fire
hazard.
ELCB must be incorporated in the fixed wiring.
•
• Circuit breaker must be incorporated in the fixed wiring
in accordance with the wiring regulations.
When Transporting
It may need two or more people to carry out the
•
installation work.
Care should be taken when lifting or moving the unit to
•
reduce the chance of serious injury. Do not attempt to
move the equipment without the correct means of lifting.
When Installing...
Select an installation location which is rigid and strong
enough to support or hold the unit, and select a location for
easy maintenance.
When Servicing
Turn the power OFF at the main power box (mains), wait
•
at least 10 minutes until it is discharged, then open the
unit to check or repair electrical parts and wiring.
Keep your fingers and clothing away from any moving
•
parts.
• Clean up the site after you finish, remembering to check
that no metal scraps or bits of wiring have been left inside
the unit.
WARNING
• This product must not be modified or disassembled under
any circumstances. Modified or disassembled unit may
cause fire, electric shock or injury.
• Users must not clean inside the unit. Engage authorized
dealer or specialist for cleaning.
In case of malfunction of this unit, please contact to the
•
sales dealer or service dealer for a repair and disposal.
• Any operation carried out by unauthorized personnel is
prohibited and can cause serious damage to people and
things.
Others
When disposing of the product, comply with national
Regulations.
CAUTION
4