Vestil FLB-D Series Instruction Manual

Fork mounted lifting beams

Advertisement

Quick Links

Table of Contents
FLB-D Series Fork Mounted Lifting Beams
Receiving Instructions
After delivery, remove the packaging from the product. Inspect the product closely to determine
whether it sustained damage during transport. If damage is discovered, record a complete description of
it on the bill of lading. If the product is undamaged, discard the packaging.
NOTE: The end-user is solely responsible for confirming that product design, use, and maintenance
comply with laws, regulations, codes, and mandatory standards applied where the product is used.
Technical Service & Replacement Parts
For answers to questions not addressed in these instructions and to order replacement parts, labels,
and accessories, call our Technical Service and Parts Department at (260) 665-7586. The department
can also be contacted online at http://www.vestilmfg.com/parts_info.htm.
Electronic Copies of Instruction Manuals
Additional copies of this instruction manual may be downloaded from
manuals.php.
Signal
Words..........................................................................................................................
Safety
Instructions...................................................................................................................
Exploded View and Bill of
National
Standards.................................................................................................................
Record of Satisfactory
Loading and Using the Lifting
Inspections...........................................................................................................................
Maintenance.....................................................................................................................
Labeling
Diagram..........................................................................................................................
Limited
Warranty.....................................................................................................................
Table of Contents
2999 North Wayne Street, P.O. Box 507, Angola, IN 46703
Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868
Web:
Instruction Manual
Table of Contents
Materials.............................................................................................
Condition................................................................................................
Beam......................................................................................
Copyright 2020 Vestil Manufacturing Corp.
Rev. 9/14/2020
V
M
ESTIL
ANUFACTURING
Fax: (260) 665-1339
www.vestilmfg.com
FLB MANUAL
C
.
ORP
e-mail:
info@vestil.com
https://www.vestil.com/page-
Page 1 of 7
2
2
3
4
4
4
5
5
5
6
6
7

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FLB-D Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Vestil FLB-D Series

  • Page 1 Web: www.vestilmfg.com e-mail: info@vestil.com FLB-D Series Fork Mounted Lifting Beams Instruction Manual Receiving Instructions After delivery, remove the packaging from the product. Inspect the product closely to determine whether it sustained damage during transport. If damage is discovered, record a complete description of it on the bill of lading.
  • Page 2 Transport loads with the load as close to the ground as possible. Drive at slowly when a load is applied • and brake and turn slowly and cautiously. DO NOT modify the beam in any way UNLESS you first obtain written approval from Vestil. Unapproved • modifications automatically void the LIMITED WARRANTY (p.
  • Page 3 SPECIALTY HARDWARE, SHACKLE (“LIFTING SHACKLE”) 08-145-010 FLB-D-4: 1/2” – 2 TON 99-145-019 FLB-D-6: 5/8” – 3 TON 08-145-006 FLB-D-10: 7/8” – 6 ½ TON 08-145-028 FORK ATTACHMENT RESTRAINT STRAP Table of Contents Copyright 2020 Vestil Manufacturing Corp. Page 3 of 7...
  • Page 4 Standard. Apply all relevant parts of Part II: For the User. If instructions provided in this manual apparently conflict with the Standard, then apply the instructions in the Standard. Vestil requests that you immediately share any conflicts you discover with its TECHNICAL SERVICE personnel.
  • Page 5 Step 4: Perform all necessary adjustments, replacements and/or repairs but DO NOT modify the beam Table of Contents Copyright 2020 Vestil Manufacturing Corp. Page 5 of 7...
  • Page 6 A “modification” is a change that alters the beam from original condition, like bending the structural members or removing parts. NEVER modify the beam without the express, written approval of Vestil. Modifications might make the beam unsafe to use and...
  • Page 7 Warrantee (you) for warranty service. Who may request service? Only a warrantee may request service. You are a warrantee if you purchased the product from Vestil or from an authorized distributor AND Vestil has been fully paid.

Table of Contents