Vestil FMDL Series Use And Maintenance Manual

Vestil FMDL Series Use And Maintenance Manual

Single & double eagle beak fork-mounted drum lifters
Hide thumbs Also See for FMDL Series:

Advertisement

Quick Links

Table of Contents
FMDL-Series Single & Double Eagle Beak Fork-Mounted Drum Lifters
FMDL-1 (Eagle beak™)
FPDL-11-H (Top Engaging Plastic
Barrel Handler)
Receiving instructions:
After delivery, remove the packaging from the product. Inspect the product closely to determine whether
it sustained damage during transport. If damage is discovered, record a complete description of it on the
bill of lading. If the product is undamaged, discard the packaging.
NOTE:
The end-user is solely responsible for confirming that product design, use, and maintenance comply with
laws, regulations, codes, and mandatory standards applied where the product is used.
Technical Service and Replacement Parts:
For answers to questions not addressed in these instructions and to order replacement parts, labels,
and accessories, call our Technical Service and Parts Department at (260) 665-7586. The department can
also be contacted online at http://www.vestilmfg.com/parts_info.htm.
Table of Contents
Specifications....................................
Signal
Words.....................................
Hazards............................................
Using the
Lifter.................................
Record of Original
Condition..........
Inspections &
Maintenance.................
Optional
Equipment................ 13, 14,
Limited
Warranty..............................
Table of Contents
Rev. 4/22/2019
Vestil Manufacturing Corp.
2999 North Wayne Street, P.O. Box 507, Angola, IN 46703
Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868
Web:
www.vestilmfg.com
Use and Maintenance Manual
FMDL-2 (Eagle Beak™)
Table of Diagrams
2
FMDL-1 parts diagram and bill of
2
FMDL-2 parts diagram and bill of
2
FPDL-11-H parts diagram and bill of
11
FPDL-8-L parts diagram and bill of
11
-
12
DFDL-3 parts diagram and bill of
12
Centers of Gravity
15
Labeling
16
Copyright 2019 Vestil Manufacturing Corp.
Fax: (260) 665-1339
FPDL-8-L (Base Engaging
Plastic Barrel Handler)
DFDL-3 (Eagle Beak™, Top, & Base
Engaging Barrel Handler)
Diagrams...................................8, 9,
Diagram.......................................................
FMDL MANUAL
Email:
info@vestil.com
materials.......................
materials.........................
materials...................
materials.....................
materials.........................
Page 1 of 16
3
4
5
6
7
10
12

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FMDL Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Vestil FMDL Series

  • Page 1 Record of Original Condition..….. DFDL-3 parts diagram and bill of materials…………..... Inspections & Maintenance…...……….. Centers of Gravity Diagrams………….……..…………8, 9, Optional Equipment……………. 13, 14, Labeling Diagram…………………………….………………… Limited Warranty………………………… Table of Contents Copyright 2019 Vestil Manufacturing Corp. Page 1 of 16...
  • Page 2: Specifications

    DO NOT transport drums over rough terrain UNLESS they are secured to the lifter with a ratchet strap. • DO NOT modify the drum lifter in any way without first obtaining written approval from Vestil. Unapproved modifications automatically void the Limited Warranty (p.
  • Page 3 NOTE: In order for the Eagle Beak™ mechanism to work properly, the drum and its contents must weigh AT LEAST 50 lb. (~22.7kg). Quick link Attach hook of ratchet strap Table of Contents Copyright 2019 Vestil Manufacturing Corp. Page 3 of 16...
  • Page 4 ” - 20 45286 Clip, hitch pin, ” x 2 ” 40-014-029 Frame, bar, formed Bolt, hex head, ” - 20 x 40-016-052 Upper jaw, Eagle Beak™ 11003 ” Table of Contents Copyright 2019 Vestil Manufacturing Corp. Page 4 of 16...
  • Page 5 3/16 in. x 1½ in. cotter pin 37-145-004 5/16 in. x 48 in. chain 65125 3/16 in. x 1½ in. cotter pin 40-514-017 Right side upper drum gripper casting 40-512-001 Right side hinge casting Table of Contents Copyright 2019 Vestil Manufacturing Corp. Page 5 of 16...
  • Page 6 1 in. diameter x 4½ in. retaining pin Fork pockets 37-145-001 5/16 in. x 48 in. chain 40-514-005 Right side lower drum gripper weldment 40-514-009 Right side lower drum gripper arm weldment Table of Contents Copyright 2019 Vestil Manufacturing Corp. Page 6 of 16...
  • Page 7 Fork pocket 37-145-004 5/16 in. x 48 in. chain (not shown) 40-112-001 1 in. diameter x 8-5/8 in. main clevis pin 3/16 in. x 1½ in. cotter pin Table of Contents Copyright 2019 Vestil Manufacturing Corp. Page 7 of 16...
  • Page 8 ” (~52.4 cm) from the outermost edges of the drum carrier (dotted line in first graphic above). Vertical center of gravity: 8 inches (~20.5 cm) from the top of the fork pockets. Table of Contents Copyright 2019 Vestil Manufacturing Corp. Page 8 of 16...
  • Page 9 • 14¼ inches (~36.2cm) from the outer edge of each fork pocket (halfway between the fork pockets). Vertical center of gravity: • 15 inches (~38.1cm) from the bottom of the fork pockets. Table of Contents Copyright 2019 Vestil Manufacturing Corp. Page 9 of 16...
  • Page 10 • 13¼ inches (~33.7cm) from the outer edge of each fork pocket (halfway between the fork pockets). Vertical center of gravity: • 11 inches (~23cm) from the bottom of the fork pockets Table of Contents Copyright 2019 Vestil Manufacturing Corp. Page 10 of 16...
  • Page 11: Using The Lifter

    Collate the photographs and writings into a file. Mark the file “Record of Original Condition”. Compare the results of all inspections to this record to determine whether the lifter is in original condition. Do not use the lifter unless it is in Table of Contents Copyright 2019 Vestil Manufacturing Corp. Page 11 of 16...
  • Page 12: Inspections & Maintenance

    Alternatively, you may request replacement parts and/or service by calling (260) 665-7586 and asking the operator to connect you to the Parts Department. A: Label 485 B: Label 218 (on fork pocket) C: Label 287 (on fork pocket) Table of Contents Copyright 2019 Vestil Manufacturing Corp. Page 12 of 16...
  • Page 13: Optional Equipment

    Pin, self-locking, quick 99-112-004 release 08-145-041 Snap hook, ” 09-145-018 Chain, ” x 56” Bumper belt 40-001-098 subassembly * Bumper belt subassembly exploded view provided on p. 14. Table of Contents Copyright 2019 Vestil Manufacturing Corp. Page 13 of 16...
  • Page 14 SAE flat washer, ” Weldment, frame, bracket, 40-612-010 Weldment, pin, roller axle 40-514-104 roller mount SAE flat washer, 1 ” ID x 33095 40-146-006 Spring, compression 2” OD Table of Contents Copyright 2019 Vestil Manufacturing Corp. Page 14 of 16...
  • Page 15 Pin, self-locking, quick 99-112-004 release 08-145-041 Snap hook, ” 09-145-018 Chain, ” x 56” Drum saddle roller 40-001-097 subassembly * Roller subassembly provided Exploded View on p. 14. Table of Contents Copyright 2019 Vestil Manufacturing Corp. Page 15 of 16...
  • Page 16: Limited Warranty

    Warrantee (you) for warranty service. Who may request service? Only a warrantee may request service. You are a warrantee if you purchased the product from Vestil or from an authorized distributor AND Vestil has been fully paid.

This manual is also suitable for:

Fmdl-1Fmdl-2Fpdl-8-lFpdl-11-hDfdl-3

Table of Contents