Care And Cleaning - Kohler Intelligent Toilet Homeowner's Manual

Enable/Disable Automatic Features (cont.)
Press the "seat" icon on the remote control. The nightlight blinks once when the sensor is set to
short distance, twice for middistance, and three times for long distance.
A short beep indicates that the feature is enabled. A long beep indicates that the feature is disabled.
Nightlight
When enabled, the nightlight automatically turns on in low lighting conditions.
Press and hold the Flush icon on the control panel until the nightlight blinks three times.
Press the "spiral" icon on the remote control. The nightlight will blink.
A short beep indicates that the feature is enabled. A long beep indicates that the feature is disabled.
UV Disinfection
When enabled, ultra violet rays and water sterilize the spray wand daily. This feature only operates
when the seat is closed.
Press and hold the Flush icon on the control panel until the nightlight blinks three times.
Press the "sanitize" icon on the remote control. The nightlight will blink.
A short beep indicates that the feature is enabled. A long beep indicates that the feature is disabled.
Energy Save Mode
When enabled, the toilet conserves energy by reducing the heated seat temperature when the toilet
is not in use.
Press and hold the Flush icon on the control panel until the nightlight blinks three times.
Press the "seat temp" icon on the remote control. The nightlight will blink.
A short beep indicates that the feature is enabled. A long beep indicates that the feature is disabled.

Care and Cleaning

WARNING: Risk of property or product damage. Do not use in-tank cleaners in your toilet.
Products containing chlorine (calcium hypochlorite) can seriously damage fittings in the tank. This
damage can cause leakage and property damage.
Kohler Co. shall not be responsible or liable for any tank fitting damage caused by the use of cleaners
containing chlorine (calcium hypochlorite).
For best results, keep the following in mind when caring for your KOHLER product:
• Always test your cleaning solution on an inconspicuous area before applying to the entire surface.
• Wipe surfaces clean and rinse completely with water immediately after applying cleaner. Rinse and
dry any overspray that lands on nearby surfaces.
• Do not allow cleaners to soak on surfaces.
• Use a soft, dampened sponge or cloth. Never use an abrasive material such as a brush or scouring
pad to clean surfaces.
• For Artist Edition Toilets: Treat your decorative product just as you would treat your fine china.
DO NOT use bristle brushes or abrasive-backed sponges. They will scratch decorative surfaces. Use
only warm water to clean. Dry with a cotton cloth or soft sponge.
For detailed cleaning information and products to consider, visit kohler.com/clean. To order Care & Cleaning
information, call 1-800-456-4537.
Kohler Co. 9 1295780-5-A