Manual Operation - Kohler Intelligent Toilet Homeowner's Manual

Spray
Wand
Seat
Sensor
Area

Manual Operation

NOTE: When the cleansing wash features are activated from the control panel, they will default to the
middle temperature, pressure, and wand position settings.
Front Wash - Press the icon to activate front wash. Washing will stop automatically after 5 minutes
or can be stopped by pressing the Stop icon.
Rear Wash - Press the icon to activate rear wash. Washing will stop automatically after 5 minutes or
can be stopped by pressing the Stop icon.
Stop - Press the icon to stop front wash, rear wash, dryer and deodorizer features.
Flush - Press the icon to manually flush the toilet. When the power to the toilet is off, press and
hold the icon for 2 seconds to flush. To flush during a power outage, pour a 2-gallon bucket of
water into the bowl.
Low Light Sensor - Senses low light levels and turns the nightlight on when the automatic feature
is enabled. To enable or disable the nightlight, refer to the "Enable/Disable Automatic Features"
section.
Standby Mode - To conserve energy, press and hold the Stop icon until a beep is heard. The
automatic cover open/close feature, remote control functionality, and heated seat options are
deactivated. Press any icon on the control panel to reactivate the features.
1295780-5-A
Front
Wash
Low Light
Sensor
Control
Panel
4
Rear
Wash Stop
Flush
Kohler Co.