Tv Setup For Connected Equipment - Bang & Olufsen BeoVision MX 4002 User Manual

30
Press to call up the main menu
MENU
The main menu appears...
then
Press until Setup is lit up
then
Press to call up the Setup menu
GO
The Setup menu appears...
Press until Sockets is lit up
then
Press to call up the Sockets menu
GO
The Sockets menu appears...
Press to reveal options for the items
in the menu
or
Press to move from item to item
t t
or
s s
Once all the relevant information
has been entered...
Press GO to store it and return to the
GO
main menu
or
Press STOP to return to the Setup
STOP
menu without storing the
information you have entered
Press to remove the menus from the
EXIT
screen
C O N N E C T I N G

TV setup for connected equipment ...

The main menu
The Setup menu
PL AV1
Off V.TP-1+Dec
The TV Sockets menu – allows you to register
equipment such as external speakers, a video tape
recorder or any non-Bang & Olufsen equipment.
E X T R A E Q U I P M E N T
Menu
• TV program list
• Sound
• Picture
• Setup
Setup
• Tuning
• Timer
• Clock
• Sockets
• Stand
AV2 S-VHS
V.TP-2 B&O Off
Before you start...
You only have to program the TV setup if:
• You have connected external Power Link
speakers to your MX 4002 TV
• You have connected a Bang & Olufsen video
tape recorder of a type other than the BeoCord
VX 7000 or V 8000
• You have connected any non-Bang & Olufsen
equipment to your TV
The equipment you have connected to
your MX 4002 TV must be registered in
the TV Sockets menu*. When you have
filled in all the information required,
the TV setup is completed.
See the next page for information of
the individual items on the Sockets
menu.
*Note: Please refer to page 28 for information of
what can be connected to your MX 4002 TV and
where to connect it.
Please note...
If no connections are made to a sockets, the
text in the Sockets menu must read "Off".