Table of Contents
Advertisement
16
Switches on your TV
TV
Then operate the TV as usual
Main video sources...
Switches on to satellite TV
SAT
Starts the video tape recorder
V TAPE
To watch TV programmes from
e.g.decoded TV program numbers
Press until LINK* is displayed
LIST
then
Press to start watching TV from the
TV
main system
Main audio sources...
Switches on the radio
RADIO
Starts the CD player
CD
Starts the audio tape recorder
A TAPE
Press to step through your program
numbers or tracks on a CD or on a
or
video- or audio tape
Alternatively, key in the exact
0
program or track number you want
through
9
Press to pause your CD player, audio
STOP
or video tape recorder
Rewinds a tape; searches backwards
s s
or
on a CD
Fast forwards a tape; searches
t t
forwards on a CD
Press to resume playing
GO
Press to switch off your TV
•
Press for 2 seconds to switch off your
main system
D A I L Y
O P E R A T I O N S
Using your link TV
The operations described on this page
are primary functions which you will be
using daily, either from your MX 4002
or from your main Bang & Olufsen
system.
You can watch TV in your Link room,
or you can switch on any source you
like (audio/video) from your main
system and watch it on your MX 4002
TV, or listen to it via the speakers in
your TV.
To carry out these operations just press
the appropriate buttons on the Beo4
remote control.
If, for some reason, you want to watch
a TV programme from your main TV
for example a decoded programme,
press LIST until LINK* is displayed, then
TV.
For details of how to use Teletext,
please refer to Teletext, pages 18-22.
*Note: In order to display LINK on Beo4, you must
add the function to the Beo4 list of functions,
please refer to Beo4's own User's guide and the
chapter, Customizing your Beo4, for further
instruction.
Adjusting sound...
While you are watching or listening to a source
from your main system on your MX 4002, you can
adjust the sound in your TV speakers, without
interfering with your main system:
∧
∨
•
or
raises or lowers the volume level
• Press the volume button right on the middle to
silence the speakers immediately.
Press again to recall the sound.
To make any further adjustments to the sound
(or to the picture) in your TV, please refer to
Picture and sound, pages 23-26.
Adjusting the position of your MX 4002...
If your TV is mounted on a motorised stand or
base, the TV will turn to a preset position when
you switch it on. You can preset such a position
yourself, see page 14 for further instruction.
You can turn the TV yourself by pressing LIST until
STAND is displayed on Beo4, now press
to turn. The TV can be turned by up to 35 degrees
to either side.
You can, furthermore, turn the TV to 9 different
preset positions, use the numbers 1-9 on Beo4, 1 is
the utmost left position and 9 is the utmost right
position. Pressing 0 will return the TV to the
preset On position.
s s
t t
or
Hide quick links:
Advertisement
Table of Contents
