Tuning; Tuning In Tv Stations - Bang & Olufsen BeoVision MX 4002 User Manual

8
Press to call up the main menu
MENU
The main menu appears...
Press until Setup is lit up
then
Press to call up the menu
GO
The Setup menu appears...
Press to call up Tuning
GO
The Tuning menu appears, Freq is lit
up already ...
then
Press to let the system search for
or TV stations
Or use the number keys to key in an
2
exact frequency, e.g. 210 Mhz
1
0
Fill in the necessary information in
this first menu...
Press to move to the other items
t t
or in the menu
s s
Press to reveal options for the items
or in the menu;
then
Press GO to store and move to the
GO
second Tuning menu
The second Tuning menu appears...
then
Fill in the characteristics you want
for your station and move to
Store...
then
GO Press GO to store your station
Press to remove the menus
EXIT
T U N I N G

Tuning in TV stations

Menu
• TV program list
• Sound
• Picture
• Setup
The main menu
Setup

• Tuning

• Timer
• Clock
• Sockets
• Stand
The Setup menu – provides access to functions
such as, Timer sound, setting the clock, registering
TV setup and presetting positions for the stand as
well as Tuning.
Freq Fine System
210 +1 B/G
The first Tuning menu – is mainly for the actual
tuning of stations. Decoder only appears, if a
decoder has been registered for your TV.
Pg Name Sound
11 . . . . . . . . . . Stereo
The second Tuning menu – allows you to add
characteristics to your station such as a program
number and name.
Before you start...
Make sure that you select the appropriate
broadcast system in the Tuning menu before you
start tuning in channels. Please note that the TV's
are equipped to receive the appropriate broadcast
system, only some TV's offer more than one
broadcast system.
To be able to watch any programmes
on your MX 4002 TV, you must tune in
to the stations you want that are
available in your area. You must call up
the Tuning menu to access the tuning
function.
The tuning function consists of two
menus. A menu for the actual tuning in
and a second menu where you must fill
in the required information regarding
your station, such as program number
as well as choose any other
characteristics you want for the
individual station. Repeat this
procedure for all the stations you want
Decoder
to tune in.
Off
See the following page for further
information about the individual items
on the two Tuning menus...
Store