Stand; Presetting A Stand Position - Bang & Olufsen BeoVision MX 4002 User Manual

14
To preset an On position yourself...
Press to call up the main menu
MENU
The main menu appears...
Press until Setup is lit up
then
Press to call up the Setup menu
GO
The Setup menu appears...
Press until Stand is lit up
then
Press to call up the Stand menu
GO
The Stand menu appears...
then
Press to turn the TV to your
t t
preferred position
or
s s
Or
Use the number keys 1-9 to select
1
through a preset stand position, 1 is the
9 utmost left position and 9 the
utmost right position
then
Press GO to store it
GO
Press to remove the menus
EXIT
S T A N D

Presetting a stand position

Menu
• TV program list
• Sound
• Picture
• Setup
The main menu
Setup
• Tuning
• Timer
• Clock
• Sockets

• Stand

The Setup menu
Turn TV to preferred position
The Stand menu – prompts you to turn the TV
to your desired position
If your MX 4002 is mounted on a
motorised stand or base, the TV will
turn to a preset position when you
switch it on.
You can, however, preset a position
yourself so that the TV automatically
turns to a position which suits your
favourite viewing angle.
To do so, call up the Stand menu, turn
the TV and choose the On position you
want the TV to turn to and store it.
To check that it turns to the correct
position, switch the TV to standby and
switch it back on again.