Adapt The Loudspeaker To Your Room - Bang & Olufsen BeoLab 7-1 User Manual

8
When a loudspeaker is placed in
a corner or close to a wall, the
bass level is boosted compared to
the bass level from a loudspeaker
placed in a more free-standing
position.
To remove this excessive bass
boost, use the POSITION switch
to ensure that the bass level suits
the placement of the loudspeaker.
The appropriate switch setting
depends on the distance from
the loudspeaker to the walls and
corners of the room.
UG02 BeoLab 7-1 (non-BV7)_ENG.indd 8 UG02 BeoLab 7-1 (non-BV7)_ENG.indd 8

Adapt the loudspeaker to your room

The POSITION switch
The POSITION switch has two
settings – F and W:
• F (Free-standing position)
Use this setting if the loudspeaker
is placed so that the front grill is
more than 50 cm (20") from the
rear wall.
• W (Wall position)
Use this setting if the loudspeaker
is placed so that the front grill is
less than 50 cm (20") from the rear
wall.
Always use this setting when the
loudspeaker is placed on the wall
bracket.
F W
The POSITION switch is located on
the socket panel.
How to measure... The distance
is measured as shown here – the
loudspeaker seen from above.
9/30/04 11:24:28 AM 9/30/04 11:24:28 AM