Table of Contents
Advertisement
FEC Order, Period, and Row
The FEC Order for this virtual channel corresponds to the depth of the conceptual grid used
for forward error correction. Values are from 4 to 20. The FEC Period of 1 to 20
corresponds to the width of the conceptual grid used for forward error correction. Row FEC
can also be enabled, to be used in addition to column FEC.
TS Packets Per IP
The value in this field (1 to 7) sets the number of transport stream packets per IP packet.
Demultiplexer PID Map
PIDS: ECM, PCR, PMT, Video, Audio, and Data
The initial packet identifiers for ECM, PMT, Video, etc., are only applicable when the PID
Map parameter is set to Manual. If the program has multiple ECM streams, subsequent
PIDs are assigned consecutively.
-1 is the default value, which cannot occur in an MPEG stream. Virtual channels configured
for automatic PID assignment can use -1 to indicate the absence of specific PID assignment.
The values of 0 to 15 are reserved to carry the program association table (PAT) and other
standard tables. If the VC is configured for manual PID assignment and this parameter is set
to a value between -1 and 15 while the VC is active, the module triggers a Configuration
Error fault.
16 to 8090 is the range of possible PID values; a value of 8191 indicates that this VC carries
only null packets. This parameter's upper limit, 8190, excludes the null PID.
Conditional Access System
Vendor and CA Systems ID
Use the Vendor parameter to select the manufacturer of your external conditional access
system, and the CA System ID for the code assigned by the vendor.
Generic
Irdeto
Conax
Irdeto
SEL-MDX1
Installation and Operation Manual
Copyright © 2011, Harris Corporation
25
Advertisement
Table of Contents
