Table of Contents
Advertisement
12
SEL-MDX1
Installation and Operation Manual
Time to Live
Primary and Secondary Data Eth MAC
Data Eth Protection
Selected Data Eth Interface
Copyright © 2011, Harris Corporation
IP Address, IP Subnet Mask, and IP Gateway
These settings are required for the module's video gateway on the VLAN.
Use this field to set the time-to-live (TTL) value for IP packets carrying an MPEG transport
stream on the selected VLAN. Each time a packet passes through a node, this number
decreases. When the TTL value decreases to zero (without reaching the desired destination),
the packet is discarded. The Time to Live range is 1 to 255 hops.
This read-only parameter indicates the factory-set MAC ID.
This parameter provides a switchover function, making it possible to for you to choose
Primary, Secondary, or Automatic switchover protection. When set to Automatic, a
failure in the primary stream causes the module to switch to the secondary stream. The
module will not return to the primary feed unless there is a failure on the secondary feed
and the primary feed has been stable for 30 seconds.
This read-only parameter displays the status of the data ethernet protection.
Advertisement
Table of Contents
