Table of Contents
Advertisement
Input IP Status
The following options are available under Input IP Status:
Corrected Packets
Uncorrectable Packets
Delay Variation
IP Encapsulation
TS Per IP
Column FEC
Row FEC
FEC Order
FEC Period
Primary IP Packets
Secondary IP Packets
Output Channels
Delete Channel
This parameter deletes the channel's association with its current demultiplexer function.
Function
The Function parameter sets the payload type and processing for this virtual channel to
either Program, PID, or Off.
Destination Type
The selected channel is transmitted to cross connected destinations within the frame (CXN)
or to an external IP destination (Ext-IP). If the destination is external, the channel can be
specified to be variable bit rate (VBR) or constant bit rate (CBR). The default is CXN.
Program Number
When demultiplexing MPTS input, the program number selects a particular program from
the transport stream and directs that program to this channel. All output channels for an
interface must specify a unique program number.
CBR \ Policing Rate
This parameter sets the output policing rate for data transmitted on the channel. Data is
allowed up to the maximum rate set in this field and excess packets are discarded. Setting
the value to 0 disables policing. If CBR processing is selected on this channel, the output bit
stream is padded up to this rate.
Policing can occur at a rate between 1 and 214 Mb/s. Virtual channels with the PID or
Program function will discard packets that cause the stream to exceed this rate.
SEL-MDX1
Installation and Operation Manual
Copyright © 2011, Harris Corporation
23
Advertisement
Table of Contents
