Demultiplexers
The following categories are available under Demultiplexers:
The following options are common to all the demultiplexer categories:
General
New Channel and New Channel Assigned
These parameters allocate a new channel for this demultiplexer function, and indicate the
index of the most recent channel that was allocated to this demultiplexer.
Source Type
This control sets the source type for this demultiplexer input. Options are:
Passthrough
This parameter specifies whether to bypass the port's demultiplexer. When Enable is
selected, the interface transmits one multi-program transport stream as input and makes
that stream available on one VC, which may then serve as a cross- connection source. The
Disable option multiplexes the input stream into one or more single-program transport
streams. Each program may be directed to its own VC and each such VC may serve as a
cross connection source.
Current Start
Current Late Pkts
Next Ident
Next Start
General
IP Source
Input TS Status
Input IP Status
Output Channels
Input Program Status
CXN (internal frame IP network)
Ext-Mod (default; back module ASI/SMPTE 310M input)
Ext-IP-CBR
Ext-IP-VBR
SEL-MDX1
Installation and Operation Manual
Copyright © 2011, Harris Corporation
21