Table of Contents
Advertisement
22
SEL-MDX1
Installation and Operation Manual
IP Source
Input TS Status
Copyright © 2011, Harris Corporation
If more than one VC is configured to operate on this interface, only the first VC is used, and
a configuration alarm is raised. To clear the alarm, delete all but one VC and then Enable
this control.
SI Mode
Use this field to specify the system information table paradigm.
MPEG processes and preserves generic MPEG control tables, but discards MPEG
application-specific SDTs.
DVB processes and preserves Digital Video Broadcasting (DVB) control tables. This
setting forwards the SDT on PID 17 through the demultiplexer.
Standard
Use this parameter to set the input source to Auto or ASI.
The following options are available under IP Source:
Primary VLAN ID
Primary IP Group
Primary IP Port
Primary Mcast Src 1
Primary Mcast Src 2
Secondary VLAN ID
Secondary IP Group
Secondary IP Port
Secondary Mcast Src 1
Secondary Mcast Src 2
The following options are available under Input TS Status:
Standard
SI Presence
Input Rate
Packets
TS ID
PAT Version
Errored Seconds
Line Errors
Loss of Frame
Loss of Signal
Advertisement
Table of Contents
