Safety Instructions - ABB SCC-S Operator's Manual

Safety Instructions

Requirements for Safe Operation
Personnel Qualifications
Special Information and Precautions
National Regulations
Device Safety and Safe Operation
Protective Lead Connection
Risks of a Disconnected Protective Lead
In order to operate in a safe and efficient manner the device should be properly
handled and stored, correctly installed and set-up, properly operated and
correctly maintained.
Only persons familiar with the installation, set-up, operation and maintenance of
comparable devices and certified as being capable of such work should work on
the device.
These include
 The content of this operator's manual,
 The safety information affixed to the device,
 The applicable safety precautions for installing and operating electrical
devices,
 Safety precautions for working with gases, acids, condensates, etc.
The regulations, standards and guidelines cited in this operator's manual are
applicable in the Federal Republic of Germany. The applicable national
regulations should be followed when the device is used in other countries.
The device is designed and tested in accordance with the relevant safety
standards and has been shipped ready for safe operation. To maintain this
condition and to assure safe operation, read and follow the safety information in
this operator's manual. Failure to do so can put persons at risk and can lead to
device damage as well as damage to other systems and devices.
The protective lead (ground) should be attached to the protective lead connector
before any other connection is made.
The device can be hazardous if the protective lead is interrupted inside or outside
the device or if the protective lead is disconnected.
5