Emerson Rosemount 2110 Quick Start Manual page 19

Vibrating fork

Hide thumbs Also See for Rosemount 2110:

November 2020

5. The certification of the level switch relies upon the following

materials used in its construction:

6. It is the responsibility of the user to ensure:

7. Cleaning-In-Place (CIP) routines up to 160 °F (71 °C) are suitable for

the level switch.

8. Steaming-In-Place (SIP) routines up to 302 °F (150 °C) are suitable for

the level switch.

Quick Start Guide

a. Product contact surfaces

Probe:

b. Non-product contact surfaces

Enclosure:

Lens:

Seals:

Connector:

a. The materials listed in instruction

and cleaning (sanitisation) processes.

b. The installation of the level switch is drainable and cleanable.

c. That the joint requirements between the probe and the

vessel/pipe are compatible with the process media,

applicable standards, and code of practice. In EHEDG

applications, the seals (gaskets) used should be as defined in

the EHEDG position paper "Easy cleanable pipe couplings and

process connections".

Stainless steel 316/316L

Stainless steel 304 type

Nylon 12

Nitrile rubber

Nylon (PA6)

are suitable for the media

Quick Start Guide

Table of Contents