Huawei NE40E-M2 Series Hardware Description page 23

Fixed Interface Board
Table 4-8 Buttons
Button
RESET
Table 4-9 Indicators
Indicator
SYS-STAT
MGMT-ETH
Table 4-10 Management interfaces
Interface
Name
0/0-0/3
0/4-0/43
MGMT-E
TH
Console/A
UX
Issue ()
Description
This button is used to reset the MPU. Press and hold the button for 3
seconds or longer, the board is reset, and the SYS-STAT indicator
keeps blinking.
Status Description
If this indicator is steady green, the board is working properly.
If this indicator is steady red, the hardware on the board is faulty.
If this indicator is off, the board is not powered on or not registered.
If this indicator is steady green, the link is Up.
If this indicator blinks, data is being received and transmitted.
If this indicator is steady off, the link is Down.
Interfac Connec
e Type tor
Type
10GE SFP+
GE SFP
Ethernet RJ45
interface
(10M/100
M/1000
M
Base-TX
autonegot
iation)
Console/ RJ45
AUX
hybrid
interface
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description Cable
Interface for Optical fiber
10GE optical
signal input and
output
Interface for Optical fiber
GE optical
signal input and
output
It connects to Super category 5 shielded twisted
an NMS. pair
It connects to 8-core shielded cable
the console for
on-site system
configuration.
4 Chassis
21