Huawei NE40E-M2 Series Hardware Description page 122

Panel
Table 7-141 Indicators
Indicator
STAT
L/A(0-1)
Table 7-142 Service interfaces
Interface
Name
OUT0 IN0
OUT1 IN1
Functional Specifications
Features and
Functions
Basic function
Reliability and
availability
Restrictions and
Remarks
Issue ()
Status Description
Status indicator
Green:
 If the indicator is steady on, the PIC is working properly.
Red:
 If the indicator is steady on, the hardware on the PIC is faulty.
Yellow:
 If the indicator is steady on, the PIC is installed in a slot for a
HIC and an alarm is reported or the PIC is not loaded with the
logic.
If the indicator is off, the PIC is powered off or is not registered.
Running status indicator
Green:
 If the indicator is steady on, the link is normal.
 If the indicator is off, the link is Down.
 If the indicator blinks, data is being transmitted.
Interfac Connec
e Type tor
Type
10GE SFP+
Remarks
2-port 10GBase LAN/WAN-SFP+ physical interface card (PIC),
supporting optical signal input and output of two 10GE interfaces.
Support for hot swap.
The board does not support the OTN mode or FEC function. If a
colored optical module is used and does not support optical amplifier
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description Cable
Interfaces for LC optical fiber
2-channel
SFP+ optical
signal input and
output
7 Boards
120