Huawei NE40E-M2 Series Hardware Description page 149

Indicator
L/A(0-1)
Table 7-201 Service interfaces
Interface
Name
OUT0
IN0-OUT1
IN1
Functional Specifications
Features and
Functions
Basic function
Reliability and
availability
Restrictions and
Remarks
Technical Specifications
Table 7-202 Interface specifications
Attribute
Optical type supported
Working mode
Issue ()
Status Description
Running status indicator
Green:
 If the indicator is steady on, the link is normal.
 If the indicator is off, the link is Down.
 If the indicator blinks, data is being transmitted.
Interfac Connec
e Type tor
Type
10GE SFP+
Remarks
2-port 10GBase LAN/WAN-SFP+ physical interface card (PIC),
supporting optical signal input and output of two 10GE interfaces.
Support for hot swap.
The board does not support the OTN mode or FEC function. If a
colored optical module is used and does not support optical amplifier
insertion, the board supports only point-to-point optical transmission.
Description
 8.14 10Gbps SFP+ Optical Module
 8.15 10Gbps SFP+ CWDM Optical Module
 8.16 10Gbps SFP+ BIDI Optical Module
 8.17 10Gbps SFP+ DWDM Optical Module
Full-duplex
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description Cable
Interfaces for LC optical fiber
2-channel
SFP+ optical
signal input and
output
7 Boards
147