Huawei NE40E-M2 Series Hardware Description page 17

5. ESD jack
Slot Layout
Figure 4-5 Slot layout
Table 4-2 Description of slot layout
Slot Name
Slots for PICs
Fixed interfaces
Slot for PSUs
Slot for fans
Fixed Interface Board
Table 4-3 Buttons
Button
RESET
Table 4-4 Indicators
Indicator
SYS-STAT
Issue ()
6. Cable tray
Slot Quantity
2
1
2
1
Description
This button is used to reset the MPU. Press and hold the button for 3
seconds or longer, the board is reset, and the SYS-STAT indicator
keeps blinking.
Status Description
If this indicator is steady green, the board is working properly.
If this indicator is steady red, the hardware on the board is faulty.
If this indicator is off, the board is not powered on or not registered.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7. Power supply module
Slot ID
1 and 2
3
4 and 5
6
4 Chassis
-
Remarks
including
high-speed,
low-speed cards and
other PICs that
support hot swap
-
-
-
15