8.1 Optional parts (piping connection parts for exhaust outlet)
Optional parts
L-shaped hose joint
Manual valve with copper
joint
Manual valve with hose joint
Swivel joint
Swivel copper pipe joint
Swivel hose joint
Check valve joint (angle type)
Check valve joint (straight
type)
Optional parts, except for L-shaped hose joint and check valve joint, are requested to be installed on the
customer's side to comply with model registrations for Japan Water Works Association.
8.2 Dimensions of optional parts
Hose inside
L-shaped hose joint
Swivel joint
Connection
R 1/4 X Φ6 (hose inside
diameter)
R 1/4 X Φ8 (copper pipe
outside diameter)
R 1/4 X Φ6 (hose inside
diameter)
R 1/4 X Rc 1/4
R 1/4 X Φ8 (copper pipe
outside diameter)
R 1/4 X Φ6 (hose inside
diameter)
R 1/4 X Rc 1/4
R 1/4 X Rc 1/4
diameter
with copper joint
Swivel copper pipe joint
Check valve joint
(angle type)
8. Optional parts
Copper pipe
outside diameter
Manual valve
Copper pipe
outside diameter
Check valve joint
(straight type)
7
Others
This joint can be installed at our factory
(Model: TA-16L).
Install this joint on the customer's side.
Install this joint on the customer's side.
Install this joint on the customer's side.
Install this joint on the customer's side.
Install this joint on the customer's side.
This joint can be installed at our factory
(Model: TA-16CVA).
This joint can be installed at our factory
(Model: TA-16CVS).
Hose inside
diameter
Manual valve
with hose joint
Hose
inside
diameter
Swivel hose joint
■EPDT-30■