System Features; Front View; Drive Carrier Indicators - Supermicro SuperServer 110P-WTR User Manual

1.2 System Features

The following views of the system display the main features. Refer to
specifications.

Front View

Service/Asset Tag
with BMC Password
1
0
Feature Description
Drive Bays
Ten 2.5" hot-swap drive bays
(Items 0 to 9)
Control Panel See the next page for details.
USB Ports Two USB 3.2 Gen 1 ports

Drive Carrier Indicators

Each drive carrier has two LED indicators: an activity indicator and a status indicator. For RAID
configurations using a controller, the meaning of the status indicator is described in the table
below. For OS RAID or non-RAID configurations, some LED indications are not supported,
such as hot spare. For VROC configurations, refer to the VROC appendix in this manual.
Color
Activity
Blue
LED
Blue
Off
Status
Red
LED
Red
Red
Red
Red
Drive Bays
3 5
2 4
Figure 1-1. Front View
System Features: Front
Drive Carrier LED Indicators
Blinking Pattern Behavior for Device
Solid On Idle SAS/NVMe drive installed
Blinking I/O activity
Idle SATA drive
Solid On Failure of drive with RSTe support
Blinking at 1 Hz Rebuild drive with RSTe support
Blinking with two blinks Hot spare for drive with RSTe support
and one stop at 1 Hz
On for five seconds, Power on for drive with RSTe support
then off
Blinking at 4 Hz Identify drive with RSTe support
10
Chapter 1: Introduction
Appendix B for additional
Control Panel
7 9
6 8
USB 3.2 Gen 1 Ports
Drive Bays