Table of Contents
Advertisement
IMPORTANT:
•
Do not slide the liner along the locking track to reposition it, this could tear the liner. Pull it out on
the track and reinsert it in the correct position.
•
Flatten the liner against the floor of the pool and push it into the horizontal and vertical corners to
smooth out creases as much as possible. Do not fill the pool while crease remain.
The corner blocks (213) are used to block the liner in position in the corners of your TROPIC JUNIOR pool.
The corner blocks are not designed to be dismantled. They should only be put in position after the liner is
correctly positioned.
After the liner corner blocks are put in position, will the pool with water to a depth of 58 cm. While the pool
is filling, assemble the filter and coping.
5.3
Assembling the filter
301
×1
302
×1
Mount the filtration pump (301) on the body of the filter (302) by pushing on the bottom and twisting one
quarter turn.
300
×1
104
×4
Attach this filter/ pump assembly to its base (300) using 4 screw (103). Make sure that the pump cable is
protruding from the back of the base.
2017/04 - Indice de révision : A - Code : 37411
15/24
Advertisement
Table of Contents
