Table of Contents
Advertisement
Scope of delivery
Application area
Packaging
Transport
Transport inspection
Storage
Storage and transport
temperature
Electronics module • VEGAMIP series 60 - receiving unit
3 Product description
3.1 Configuration
The scope of delivery encompasses:
Electronics module for emitting unit VEGAMIP series 60
l
(MP60EE.T**) or electronics module for receiving unit VEGAMIP
series 60 (MP60EE.R**)
Documentation
l
this operating instructions manual
-
3.2 Principle of operation
The electronics module MP60 is suitable as a replacement for the
electronics of microwave barrier VEGAMIP series 60.
3.3 Packaging, transport and storage
Your instrument was protected by packaging during transport. Its
capacity to handle normal loads during transport is assured by a test
according to DIN EN 24180.
The packaging of standard instruments consists of environment-
friendly, recyclable cardboard. For special versions, PE foam or PE foil
is also used. Dispose of the packaging material via specialised
recycling companies.
Transport must be carried out under consideration of the notes on the
transport packaging. Nonobservance of these instructions can cause
damage to the device.
The delivery must be checked for completeness and possible transit
damage immediately at receipt. Ascertained transit damage or
concealed defects must be appropriately dealt with.
Up to the time of installation, the packages must be left closed and
stored according to the orientation and storage markings on the
outside.
Unless otherwise indicated, the packages must be stored only under
the following conditions:
Not in the open
l
Dry and dust free
l
Not exposed to corrosive media
l
Protected against solar radiation
l
Avoiding mechanical shock and vibration
l
Storage and transport temperature see chapter "Supplement -
l
Technical data - Ambient conditions"
3 Product description
5
Advertisement
Table of Contents
