Related Manuals for Vega VEGACAP 60 Series
Summary of Contents for Vega VEGACAP 60 Series
- Page 1 Operating Instructions Electronics module VEGACAP series 60 Document ID: 30174 Capacitive...
- Page 2 Contents Contents About this document Function........Target group ......Symbolism used.
-
Page 3: Function
1 About this document 1 About this document 1.1 Function This operating instructions manual has all the information you need for quick mounting and setup of a replacement module. Please read this manual before you start setup. 1.2 Target group This operating instructions manual is directed to trained qualified personnel. -
Page 4: Authorised Personnel
2 For your safety 2 For your safety 2.1 Authorised personnel All operations described in this operating instructions manual must be carried out only by trained specialist personnel authorised by the plant operator. During work on and with the device the required personal protective equipment must always be worn. -
Page 5: Product Description
3 Product description 3 Product description 3.1 Structure Scope of delivery The scope of delivery encompasses: Electronics module for VEGACAP series 60 (CP60) Documentation this operating instructions manual 3.2 Principle of operation Application area The electronics module CP60 is suitable for replacement in VEGACAP series 60 capacitive level switches. -
Page 6: Instructions For Installation
4 Mounting 4 Mounting 4.1 Instructions for installation If the electronics module is defective, it can be replaced by the user. In Ex applications only one instrument and one electronics module with respective Ex approval may be used. 4.2 Mounting preparations In general, all electronics modules of series CP60 can be inter- changed. - Page 7 4 Mounting Compare the settings of the two electronics modules. Set the adjustment elements of the new electronics module to the same setting of the old one. Information: Make sure that the housing is not rotated during the electronics exchange. Otherwise the plug may be in a different position later. Insert the electronics module carefully.
-
Page 8: Setup
5 Setup 5 Setup 5.1 Setup Setup Make sure that all adjustment elements are set to the settings of the old electronics module. Hence the sensor is immediately ready for operation. In general, all oscillators of series CP60 can be interchanged. If you want to use an electronics module with a different signal output, you can download the corresponding operating instructions manual from our homepage under Downloads. -
Page 9: Instrument Repair
If a repair is necessary, please proceed as follows: You can download a return form (23 KB) from our homepage at www. vega.com under: "Downloads - Forms and certificates - Repair form". By doing this you help us carry out the repair quickly and without having to call back for needed information. -
Page 10: Dismounting Steps
7 Dismounting 7 Dismounting 7.1 Dismounting steps Take note of chapters "Mounting" and "Connecting to power supply" and carry out the listed steps in reverse order. 7.2 Disposal The replacement module consists of materials which can be recycled by specialised recycling companies. We have purposely designed the electronic modules to be easily separable. -
Page 11: Technical Data
8 Supplement 8 Supplement 8.1 Technical data Technical data are stated in the operating instructions manual of the respective sensor. Electronics module • VEGACAP series 60... - Page 12 All statements concerning scope of delivery, application, practical use and operating conditions of the sensors and processing systems correspond to the information avail- able at the time of printing. © VEGA Grieshaber KG, Schiltach/Germany 2012 Subject to change without prior notice 30174-EN-120124...
Need help?
Do you have a question about the VEGACAP 60 Series and is the answer not in the manual?
Questions and answers