Settings; Reading And Operating - Pentair HAFFMANS ICC Instruction Manual

4.6

Settings

The ICC-2000 is supplied with a number of standard settings that can be adjusted by the user:
The constants used in the CO

and/or correlation with other reference standards.
The desired values for pressure, temperature and CO

Values at which the instrument is to be calibrated can be indicated.

4.7

Reading and operating

Display
The ICC-2000 has a TFT display and three keys ("↑", "↓" and "START"). The display is activated
as soon as one of the keys is used. After the last operation, the screen will remain switched on
for a variable programmable length of time.
Attention!
The display indicates:
 Software version number immediately when switched on ("<
Values measured for pressure ("P") and temperature ("T"),

Value calculated for the CO

Whether a value is outside the measuring range ("HHH" or "LLL"),

When a battery needs charging ("BATTERY"),

Number under which the measurement is stored

Whether the value measured of pressure or temperature is stable (stops flashing)

Operating levels
The ICC-2000 has 4 levels can be set to the various operating levels. The four operating levels
are not secured.
 Measuring screen
 Configuration
Calibration

Logbook

See the "Software-Summary" in Appendix VII.
ICC
formula can be refined by the user for specific beverages
2
Wait until the values stop increasing before reading. If the display
is flashing, the value shown is unstable and still changing.
content ("CO2"),
2
For reading the values measured and calculated.
To set values, date/time/display, formula parameters and
language.
To calibrate pressure and check the temperature and pressure.
To view stored results and calibrations.
HAFFMANS ICC
content.
2
V 1.00 >"),
Page 15 of 49