Helpful Hints And Tips - Progress PAI8105E User Manual

22 progress
00
counts back to
cooking zone goes out.
• To see the remaining time: set the
cooking zone with
the cooking zone starts to flash quickly.
The display shows the remaining time.
When the time comes to an end, the sound
00
operates and flashes. The cooking zone
deactivates.
• To stop the sound: touch
Minute Minder
You can use the Timer as a Minute Mind-
er while the cooking zones do not operate.
Touch . Touch
When the time comes to an end, the sound
00
operates and flashes
• To stop the sound: touch
STOP+GO
The STOP + GO function sets all cooking
zones that operate to the lowest heat set-
ting ( ).
When STOP + GO operates, you cannot
change the heat setting.
The STOP + GO function does not stop the
timer function.
• To activate this function touch
symbol comes on.
• To deactivate this function touch
The heat setting that you set before
comes on.
Lock
When the cooking zones operate, you can
lock the control panel, but not
vents an accidental change of the heat set-
ting.

HELPFUL HINTS AND TIPS

INDUCTION COOKING ZONES
For induction cooking zones a strong elec-
tro-magnetic field creates the heat in the
cookware very quickly.
Cookware for induction cooking zones
Important! Use the induction cooking
zones with correct cookware.
Cookware material
• correct: cast iron, steel, enamelled steel,
stainless steel, the bottom made of multi-
. The indicator of the
. The indicator of
or to set the time.
. The
.
. It pre-
First set the heat setting.
To start this function touch
comes on for 4 seconds.
The Timer stays on.
To stop this function touch
setting that you set before comes on.
When you stop the appliance, you also stop
this function.
The Child Safety Device
This function prevents an accidental opera-
tion of the appliance.
To activate The Child Safety Device
• Activate the appliance with
set the heat settings.
• Touch
for 4 seconds. The symbol
comes on.
• Deactivate the appliance with
To deactivate The Child Safety Device
• Activate the appliance with
set the heat settings. Touch
seconds. The symbol
• Deactivate the appliance with
To override The Child Safety Device for
only one cooking time
• Activate the appliance with
bol comes on.
• Touch
for 4 seconds. Set the heat
setting in 10 seconds. You can operate
the appliance.
• When you deactivate the appliance with
, The Child Safety Device operates
again.
layer (with correct mark from a manufac-
turer).
• not correct: aluminium, copper, brass,
glass, ceramic, porcelain.
Cookware is correct for an induction
hob if ...
• ... some water boils very quickly on a
zone set to the highest heat setting..
• ... a magnet pulls on to the bottom of the
cookware.
The bottom of the cookware must
be as thick and flat as possible.
. The symbol
. The heat
. Do not
.
. Do not
for 4
comes on.
.
. The sym-