Advertisement
Chelsea Canopy Bed-Queen
PRE-ASSEMBLY:
•
Please read all instructions before starting to assemble.
•
Two adults are recommended during assembly.
•
Save all packing materials until assembly is complete to avoid accidentally discarding smaller parts or
hardware.
•
Do not use a power drill as it may cause cracking
PARTS INCLUDED:
A- Headboard (1pc)
D- Side Rail (2pcs)
G- Long Top Side Rail (2pcs)
J- Center Leg (3pcs)
HARDWARE INCLUDED:
M- Long Wood Screw 32mm (28pcs)
TOOLS REQUIRED (but not include):
•
Philips Head Screwdriver
B- Footboard (1pc)
E- Footboard Long Post (2pcs)
H- Short Top Side Rail (2pcs)
K- Round Finial (4pcs)
N- Short Wood Screw 16mm (4pcs)
www.pbteen.com
1/4
C- Slat Roll (1pc)
F- Headboard Short Post (2pcs)
I- Center Support Rail (1pc)
L- Leg (4pcs)
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for PB TEEN Chelsea Canopy Bed-Queen
Summary of Contents for PB TEEN Chelsea Canopy Bed-Queen
- Page 1 Chelsea Canopy Bed-Queen PRE-ASSEMBLY: • Please read all instructions before starting to assemble. • Two adults are recommended during assembly. • Save all packing materials until assembly is complete to avoid accidentally discarding smaller parts or hardware. • Do not use a power drill as it may cause cracking...
- Page 2 ASSEMBLY INSTRUCTION: 1. On a soft, scratch-free surface, such as a carpet or rug, remove all the parts from boxes. Insert the exposed screw of the Legs (L) into the pre-drilled holes on the bottom posts of the Headboard (A) and Footboard (B); turn clockwise until tights as shown below in Figure 1.1.
- Page 3 6. Lay Slat Roll (C) on the inner edges of the Side Rails (D); insert Long Wood Screw (M) into the pre-drilled holes on the Slat Roll (C) and into the Side Rails (D). Tighten using a Phillips Head Screwdriver as shown below in Figure 2.1.
- Page 4 8. To use the bed with the Canopy place the Footboard Long Posts (E) on Footboard (B) and Headboard Short Post (F) on Headboard (A), tighten by turning clockwise as shown below. Lay the Long Top Side Rail (G) between Headboard Short Post (F) and the Footboard Long Post (E) and repeat on the other side. Then place the Short Top Rail (H) between the two Headboard Short Posts (F) and repeat for the Footboard Long Posts (E).
Need help?
Do you have a question about the Chelsea Canopy Bed-Queen and is the answer not in the manual?
Questions and answers