Advertisement
Chelsea Swivel Chair
Pre-assembly:
Please read all instructions before starting to assemble.
Two-person is recommended during assembly..
Save all packing materials until assembly is complete to avoid accidentally
discarding smaller parts or hardware.
Do not use power tools as it may cause cracking.
Parts Included:
A –Chair Seat - 1pc
Hardware Included:
C– Ball tip Allen key – 1 pc
(4 x 95 x 30mm)
F –Spring Washer – 5 pcs
(5/16"x13x2mm)
Tools Required:
(1) Phillips Screwdriver (not included).
June.13, 2012
D – Allen Bolt – 2 pcs
(5/16" x 89 x 15mm)
G – Flat Washer – 5 pcs
(5/16"x18x2mm)
1 of 3
www.pbteen.com
B – Chair Back– 1pc
E – Allen Bolt – 3 pcs
(5/16" x 63 x 15mm)
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for PB TEEN Chelsea Swivel Chair
Summary of Contents for PB TEEN Chelsea Swivel Chair
- Page 1 Chelsea Swivel Chair Pre-assembly: Please read all instructions before starting to assemble. Two-person is recommended during assembly.. Save all packing materials until assembly is complete to avoid accidentally discarding smaller parts or hardware. Do not use power tools as it may cause cracking.
- Page 2 Assembly: 1. Lay down the Chair back (B) on a soft, scratch-free surface such as a rug or carpet. Align wooden dowels on chair seat (A) with pre-drilled holes in chair back (B), insert 2pcs Allen bolt(D) and 3pcs Allen bolt(E) with a Spring washer (F) and a Flat washer(G) on each bolt through the pre-drilled holes in chair seat (A) into metal inserts in Chair Back (B) as show below ,tighten with Allen key(C) but do not over tight.
- Page 3 3. To adjust the tilt of the Seat Back, loosen the tilt knob found under the seat by turning in counter- clock wise direction, tilt seat to desired position. Turn tilt knob in clockwise direction to re-tighten. Care Instructions: Avoid direct sunlight and excessive temperatures.
Need help?
Do you have a question about the Chelsea Swivel Chair and is the answer not in the manual?
Questions and answers