Axis 5550 User Manual page 95

Editing the config file
Example:
AXIS 5500 / AXIS 5550 User's Manual
Follow the instructions below to edit the config file using FTP:
1. Log in to the Axis Network Print Server by typing:
or
ftp <host name>
or in a UNIX shell.
2. Enter the user id and the password. (The default entries are
3. Download the config file to your host by typing:
get config
4. Edit the file using your preferred text editor.
5. Save the config file to the Axis Network Print Server by typing:
put config CONFIG
Notes:
• It is important that the destination file is specified in capital letters. Otherwise the edits
are temporary and will be lost once the Axis Network Print Server has been powered off.
• To edit the config file from a Macintosh you will need FTP support such as MacTCP, Fetch
or Anarchie. The procedure for editing the file is the same as described above.
The example below describes how to upload and download the config file
using FTP from a DOS window.
> ftp npserver
connected to npserver.
220 AXIS 5500 FTP Network Print Server v7.00 Sep 06
2004 ready.
Name (npserver:(none)): root
331 User name ok, need password
Password: pass
230 User logged in
ftp> get config
200 PORT command successful.
150 Opening data connection for config
(192,168,0,10,4,64), (mode ascii).
226 Transfer complete.
ftp: 10527 bytes received in 0.22Seconds 47.85
Kbytes/sec)
ftp> put config CONFIG
200 PORT command successful.
150 Opening data connection for CONFIG
(192,168,0,10,4,65), (mode ascii).
226 Transfer complete.
10527 bytes received in 0.22Seconds 47.85 Kbytes/sec)
ftp> bye
221 Goodbye.
>
Management and Configuration
in a DOS window (Windows)
ftp <IP address>
(not visible)
and .)
root pass
95